Samsung Galaxy Mini Turbo (GT-S5570i)
Warning
The instructions in this guide are intended for user with more knowledge. Applying these instructions on another device or model may produce undesired outcomes.The information in this guide is provided for instructional and educational purposes only. There is no guarantee that these instructions will work under your specific and unique circumstances.Use these instructions at your own risk. We shall not hold any responsibility or liability for whatever happens to you or your device arising from your use of the info in this guide.Read and understand the whole guide first before actually performing the instructions.
INFORMATION:
According to info that I found around on the net the next Galaxy Turbo (GT-S5570I) is completely different from the Galaxy's next (GT-S5570) or the two terminals to the external appearance are different in hardware since the Turbo is more similar to
Galaxy Y.
Here are its features:
Processor: ARMv6 rev 5 - 832Mhz
RAM: 362 MB - 72MB Reserved
GPU: Broadcom Videocore 4
NAND: 512
system: stl9 - 225MB
cache: stl10 - 35MB
Date: stl11-189MB
Price $167.00
Free shipping
FLASH Android 2.3.6
Requirements:
1) Odin (see below)
2) Driver to connect your samsung mobile to PC Download - Mirror
3) USB Cable
4) Next Turbo S5570I with at least 70% of battery
5) Windows OS (XP recommended but 7 works)
6) Firmware to be installed (see below)
The version of ODIN which is used on this device does not provide for the use of OnePackage, and then need to have the separate files.
How to get the files that are used for the flash?
There are windows and linux, windows or only with the second method.
There are 2 methods of installation and the third method to unbrick (see the bottom of the guide).
IMPORTANT!
Close the PC Suite and also the Samsung Kies Kies Monitor icon on the taskbar.
During the upgrade of the boot, if something does not go your way (battery, the cable is disconnected, you flash a wrong file, turns off the pc etc..) The phone will be permanently damaged and you will need assistance.
1 st method:
Download the version of Odin 1.84 (with associated files) to be used: Download - Mirror
Download the firmware file: Download - Mirror and pull them out of windows
Installation:
1.Open ODIN PIT and choose the file (the one in the file so you have to Odin
remove the Windows Desktop)
2. Click on pda.tar PDA and select the file, click on the file and choose PHONE phone.tar
3. Put the device in Download Mode (Hold Vol Down + Home + Power) and connect to the PC via the USB cable (check the box posts you will see the word "Added")
4.Press the START button
5.Wait up to 5 minutes, after which will show PASS (do not touch anything until it comes out the word PASS!)
6.The phone will reboot itself
7.After that will output the word PASS disconnects the cell from the PC
Method # 2:
Download the version of Odin 1.84 (with associated files) to be used: Download - Mirror
Download the original firmware (other than the first link): Download - Mirror
A developer has created a simple application called Odinatrix!
This application successfully decompressor the file(Winzip, 7-Zip, Winrar, etc..)
How do you use?
1) Download it from Download - Mirror
2) Extract the folder on your Desktop Odintrix
3) Extract the file and take S5570IDDLA1_S5570IODDLA1_INU.zip
S5570IDDLA1_S5570iODDLA1_S5570IDDLA1_HOME. Tar.md5
and copy folder Odintrix
4) Run the file "runme.bat" in the folder Odintrix, after almost half an hour in the folder you get the output file:
* CSC_S5570IXILB2_S5570iITVLB2_S5570IXXLB3_HOME.tar
* MODEM_S5570IXILB2_S5570iITVLB2_S5570IXXLB3_HOME.tar
* PDA_S5570IXILB2_S5570iITVLB2_S5570IXXLB3_HOME.tar
Installation:
5) Start Odin
6) Enter the 3 files. Tar in Odin:
* Included in PDA PDA_xxxx.tar
* Included in the PHONE MODEM_ xxxx.tar
* Included in CSC CSC_xxxxx.tar
7) PIT and / or BOOT files are not required - Leave the fields blank!
8) Leave as is everything else!
9) Put the device in Download Mode (Hold Vol Down + Home + Power) and connect to the PC via the USB cable (check the box posts you will see the word "Added")
10) Press the START button
11) Wait up to 5 minutes, after which will show PASS (do not touch anything until it comes out the word PASS!)
12) The phone will reboot itself
13) After the output will be written PASS disconnects the cell from the PC
Code
If you were to block (such as boot animation loop):
Remove the battery
Put the battery, wait 30 sec
Hold Vol Up, Home, Power simultaneously
When the logo appears, release the Power button
When the Recovery Menu, release the home button first, then the Vol Up
Select wipe data / factory reset (Vol Up + Down + Home)
Select reboot system now
Getting the Root
To obtain permission to Root at the time this is the only proven method.
Download the ZIP file: Download - Mirror
Copy the file to the Memory Card
Restart the device in recovery mode (Hold Vol Up + Home + Power)
Install ZIP from SD Card
Choose ZIP from SD Card
Select YES, install update
Reboot now
Install the ClockworkMod (Recovery)
At present the only ClockworkMod that can be installed is v5.0.2.6
Download - Mirror
How to Install?
It 'must have obtained permission to Root!
Copy the file to the Memory Card
Restart the device in recovery mode (Hold Vol Up + Home + Power)
Install ZIP from SD Card
Choose ZIP from SD Card
Select YES, install update
Reboot now
GT-S5570i UNBRICK
Here's a guide to the Unbrick Galxy Next Turbo
1. Download this archive: Download - Mirror and Extract it with WinRar
2. Open Odin3_v1.84.exe Download - Mirror
3. PIT tassve_0623.pit put in (the one in the file so you have to Odin
remove the Windows Desktop)
4. BOOTLOADER DefaultCalData put in ....
5. in PDAs and mettet PDA_S5570I ....
6. PHONE MODEM_S5570I in place ....
7. CSC put GT-MULTI-S5570I ....
8. Put the device in Download Mode (Hold Vol Down + Home + Power) and connect to the PC via the USB cable (check the box posts you will see the word "Added")
9.Press the START button
10.Wait until the end, will show a green and then blue RESET PASS (do not touch anything until it comes out the word PASS!)
11.The phone will reboot itself
12.After that will output the word PASS disconnects the cell from the PC
Bonus
Adobe Flash Player 11.1 for arm v6
Samsung GT-S network unlock
ALL TESTED AND WORKING 100% 
